[Bucardo-general] master slave not syncing after db upgrade. (triggers disabled)
Rosser Schwarz
rosser.schwarz at gmail.com
Sat Aug 11 23:18:25 UTC 2012
Can you connect to your Bucardo database and say "SELECT
validate_all_syncs();" and report what happens?
rls
On Mon, Aug 6, 2012 at 3:57 PM, jtkells <jtkells at verizon.net> wrote:
> On Mon, 6 Aug 2012 09:27:32 -0400
> jtkells <jtkells at verizon.net> wrote:
>
>> Hi,
>>
>> I'm having a bit of trouble here getting a master to slave replication
>> environment working after a database schema upgrade. I am using
>> bucardo 4.4.8 on a postgreSQL 8..4.8 database
>>
>> I have been running this master slave configuration for a long time.
>> We recently updated our schema(adding a lot of new columns etc. to a
>> lot of tables). To accommodate these changes I performed the following
>> steps:
>> 1) I stop bucardo
>> 2) I remove all tables from bucardo
>> 3) I remove the herd that these tables belonged to
>> On the database side (Master)
>> I drop the schema and recreate the schema and all its tables (new
>> columns)
>> I load the tables through program code which generates millions of
>> records to these tables (100).
>> I do a pg_dump of this schema and copy it over to the slave database
>> On the slave database:
>> I drop all the replicated tables and run pg_restore.
>>
>> On both system I analyze these tables
>> On the master database I
>> 4) I add the tables back into bucardo
>> 5) I create the herd for them
>> 6) and I start bucardo
>> Bucardo goes through checks and generates the following record for
>> each of the tables
>> [Mon Aug 6 09:16:07 2012] CTL Herd member 19494511:
>> ac_5300_18b_esri.fence
>> [Mon Aug 6 09:16:07 2012] CTL Target oids: agis_slave:4480021
>>
>> I update some columns in a table to test replication and nothing
>> happens. I have tried to do several commands to get bucardo to start
>> processing the new changes (reload, kick etc.) but still nothing. I
>> suspect the "Latest bad reason: Controller cleaning out unstarted q
>> entry " is causing the problem but not sure how to fix this? Should I
>> have deleted the sync's?
>>
>>
>> Name Type State PID Last_good Time I/U/D Last_bad Time
>> ========+=====+=====+=====+=========+=====+=====+========+====
>> agis_18b| P |idle |12596|4m39s |9s |0/0/0|25m49s |0s
>>
>>
>> Sync: agis_18b (pushdelta) esri18b => agis_slave (Active)
>>
>>
>> postgres at arp-db:~$ bucardo_ctl status agis_18b
>> Days back: 3 User: bucardo Database: bucardo
>> ======================================================================
>> Sync name: agis_18b
>> Current state: idle (PID = 12596)
>> Type: pushdelta
>> Source herd/database: esri18b / agis_master
>> Target database: agis_slave
>> Tables in sync: 100
>> Last good: 5m 25s (time to run: 9s)
>> Last good time: Aug 06, 2012 09:16:17 Target: agis_slave
>> Ins/Upd/Del: 0 / 0 / 0
>> Last bad: 26m 35s (time to run: 0s)
>> Last bad time: Aug 06, 2012 08:55:07 Target: agis_slave
>> Latest bad reason: Controller cleaning out unstarted q entry
>> PID file: /tmp/bucardo.ctl.sync.agis_18b.pid
>> PID file created: Mon Aug 6 09:16:07 2012
>> Status: active
>> Limitdbs: 0
>> Priority: 0
>> Checktime: none
>> Overdue time: 00:00:00
>> Expired time: 00:00:00
>> Stayalive: yes Kidsalive: yes
>> Rebuild index: 0 Do_listen: no
>> Ping: yes Makedelta: no
>> Onetimecopy: 0
>>
>>
>>
>> Thanking you in advance
>
>
> Further investigation I updated some records and saw that no entries in
> the q table were created. There are triggers on the tables but looking
> at the triggers in pg_trigger table I find that the triggers are
> disabled (tgenabled = FALSE in pg_trigger table). What process did I
> miss in bucardo that caused this (I dropped the tables and herd)? If I
> didn't miss anything is it safe to enable these triggers at the
> PostgreSQL level and is there anything else I need to do? Also, was
> there anything else that I should have done when I was removing the
> tables and herds in the first place?
>
> Thanking you in advance
> _______________________________________________
> Bucardo-general mailing list
> Bucardo-general at bucardo.org
> https://mail.endcrypt.com/mailman/listinfo/bucardo-general
--
:wq
More information about the Bucardo-general
mailing list